A core drill is a drill specifically designed to remove a cylinder of material, much like a hole saw. The material left inside the drill bit is referred to as the core. Core drills used in metal are called annular cutters. Core drills used for concrete are generally called Diamond Core Drills and are water cooled. For drilling masonry, carbide core drills can be used.
Core drills come with several power choices including electric, pneumatic, hydraulic all of which require power sources, such as a generator.
Stitch coring is the method of making overlapping core holes, openings can be formed in walls and floors. No limit to the sizes and depth of opening.
Stitch Coring is an effective method for removing almost any thickness of concrete where other methods cannot be applied. Core holes are drilled in a series of overlapping holes, allowing for one large segment to be removed.
Wall sawing employs a circular blade on a track-mounted machine. The track is attached to vertical walls or steep inclines, or floors. Wall sawing is typically specified to cut precise dimensional door, vent and window openings. Straight as well as bevel cuts are possible with the wall saw. The wall saw is also an excellent choice for creating precise openings in any concrete structure. The diamond wall saw blade consists of a circular steel core with diamond segments attached to the periphery. The blade is mounted on the spindle of the wall saw.
Manual Handsaw cutters are machines that can be manipulated without the need to fix on the structure. They are equipped with diamond discs, diamond chains or even with diamond rings. These machines may have gasoline or hydraulic motors and their cutting capacity is limited.These cutting method is used in small interventions in walls, closing panels, concrete pipes and other artifacts or even in places of difficult access where other equipment could not be used. This method is ideal for making small openings on slab or wall.
Wire sawing is ideal for cutting mass concrete, reinforced concrete, sections of concrete too large for other methods, and metal cutting. Since virtually no concrete or metal structure or cross-section is too large, wire saws are used where other concrete and metal cutting methods are impractical. Wire sawing applications include removing large sections of heavily reinforced concrete such as piers, towers and bridge sections, and for concrete and metal cutting in areas where work space is restricted. It can also be used under water. This advanced method of concrete and metal cutting offers many advantages including no vibration, no dust and no disruption to neighboring operations greatly reducing costly downtime. We do a lot of metal cutting work all over UAE. Call us today to discuss the work that you need done.
A Floor Saw is a power tool used for cutting concrete, masonry, brick, asphalt, tile, and other solid materials. It can be a big walk behind saw or other styles, and it may be powered by gasoline, hydraulic or pneumatic pressure, or electric motors. The saw blades used on concrete saws are often diamond saw blades to cut concrete, asphalt, stone,etc. Abrasive cut-off wheels can also be used on cut-off saws to cut stone and steel. The significant friction generated in cutting hard substances like concrete usually requires the blades to be cooled to prolong their life.
The team at Demolition Works is committed to excellence in customer service. This means we go the extra mile. We find the best solutions for you and then we meet or exceed your expectations! We promise to complete work on schedule, on budget and to a superior standard.
Even though demolition looks like a lot of chaotic banging and crashing, it is a very precise, innovative and scientific undertaking. We use the most innovative and effective techniques and machinery in the industry, to ensure everything goes down without a hitch.